XFP 16 Zone Repeater Panel (all protocols)



  • Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances).
  • Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3).
  • Includes an on-board fault relay.
  • Requires its own dedicated Mains power and battery back-up supply.
  • A maximum of eight XFP Repeaters can be connected to one non-networked XFP Main panel.
  • Communication between the XFP Main panel and Repeater requires a CFP761 network driver card (fitted as standard in all XFP510-16s, available as an optional extra on Main XFP 16 Zone panels).
  • Repeater network wired in 1.5 mm2 two-core screened fire resistant cable. Network length must not exceed 500 metres.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

Technical Specifications

Protocol/compatibility Compatible with C-TEC's XFP CAST, Apollo XP95/Discovery and Hochiki ESP main panels.
Mains supply 230V 50/60Hz.
Mains rated current 350mA maximum.
Internal power supply 27Vdc nominal.
Total output current limited to 1.4A @ 230Vac (Imax.A 210mA; Imin. 40mA).
Quiescent current TBC.
Max battery size and type 2 x 12V 3.2Ah VRLA connected in series.
Auxiliary relays Fault (Failsafe; Capable of switching 1A @ 30V DC; Must not be used for switching Mains voltages).
PC connection None.
Indicators 2 line x 40 character backlit display; 16 Zonal LEDs, General Fire; Energised; Pre-Alarm; Remote Output Activated; Remote Output Disabled; Accessed; Disablement; Test; Silenced; General Fault; System Fault.
Expansion connections On board CFP761 network driver card facilitates the connection of additional XFP Repeaters.
Product dimensions (mm) 380 W x 235 H x D 96mm;
Construction & finish Plastic lid and base; RAL7035 textured.
IP Rating IP30.
Weight 1.8kg (without batteries).
Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%.
Network specification Max. no. of Repeaters per Main XFP: 8 (any mix); Max. total length of Repeater network: 500m; Cabling requirements: 1.5mm2 two core screened fire resistant.


XFP Apollo/Hochiki Panels DoC

Declaration of Conformity (EMC/LVD) DOC0000003 Rev 3

Download (204.81k)


12 other products in the same category:

Dimensions & Mounting Information

Product dimensions: 380 W x 235 H x 96 D mm. 
Hole required for flush mounting: 367 W x 220 H x 75 D mm. No bezel required.

BIM/CAD Drawings

XFP510-16 (flush mounted) BIM(RFA)


XFP510-16 (surface mounted) BIM (RFA)