C-TEC’s XFP single loop 16 zone addressable fire alarm panel offers high performance at a very competitive price.
LPCB certified to EN54 parts 2 & 4, it is supplied in an attractive flush or surface mountable plastic enclosure, offers combined keypad or keyswitch entry to Access Levels 2 and 3 and is compatible with Hochiki's ESP protocol.
Ideal for use in small stand-alone applications or in larger applications due to its ability to sit on network of up to 8 XFP master panels, it is one of Europe's best-selling entry-level addressable fire panels.
Packed full of engineering features - some of which are not available on more expensive alternatives (see feature list below) - the XFP501E/H is also fully compatible with C-TEC’s Hush Button fire alarm solution.
Warning: Last items in stock!
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
|Approvals/certifications||Certified to EN54-2 & 4 by the LPCB.|
|Mains supply||230V 50/60Hz.|
|Mains rated current||350mA maximum.|
|Internal power supply||27Vdc nominal.|
|Total output current limited to||1.4A @ 230Vac (Imax.A 210mA; Imin. 40mA).|
|Quiescent current||50mA (loop unloaded).|
|Max battery size and type||2 x 12V 3.2Ah VRLA connected in series.|
|No. of loop drivers||1.|
|Max. loop output current||500mA (25V min; 34V max).|
|Max. loop length||1KM.|
|Max. addressable devices per loop||126.|
|No. of conventional sounder circuits||2 (Max. length per circuit is 500m).|
|EOL resistor value||6800Ω 5% Tol. 0/25W (blue, grey, red, gold).|
|Max. sounder output current||400mA.|
|Auxiliary relays||3 x Programmable Relays (programmable from C&Es). 1 x Fault Relay (active when no faults are present). Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.|
|Other outputs||24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA.|
|Auxiliary inputs||2 x Programmable Inputs (programmable from C&Es). Connect to 0V to trigger, Max. input voltage 27V (non-latching).|
|PC connection||PC connection via RS232 molex connector (supplied in XFP507 upload/download software kit); No printer connection available.|
|Indicators||2 line x 40 character backlit display; 16 Zonal LEDs, General Fire; Energised; Pre-Alarm; Remote Output Activated; Remote Output Disabled; Accessed; Disablement; Test; Silenced; General Fault; System Fault.|
|Connections||Fixed, largest acceptable conductor size 1mm2.|
|Expansion connections||2-wire RS485 non-redundant network/repeater connection available via optional XFP761 network card. Max. 8 mains per network or 8 repeaters per non-networked main. Limit 1KM (main panel network) or 500M (repeater network).|
|Product dimensions (mm)||380 W x 235 H x D 96mm.|
|Construction & finish||Plastic lid and base; RAL7035 textured.|
|Weight||1.8kg (without batteries).|
|Operating conditions/temperature||-5ºC to +40ºC. Max relative humidity: 95%.|
|Product dimensions:||380 W x 235 H x 96 D mm.|
|Hole required for flush mounting:||367 W x 220 H x 75 D mm. No bezel required.|
BIM Drawing (REVIT)