View larger

Quantec PIR Power Interface c/w Isolating Keyswitch

Part No. QT645

Condition New

Allows up to two QT638 PIR movement sensors to be connected to a Quantec addressable call system.
Connects to the slave input on a QT602 or QT609 Range Call Point.
Typically located outside a bedroom where, for example, two PIRs are being used to monitor a patient getting out of bed.
Includes an isolation keyswitch so staff entering the room can temporarily disable the PIRs from triggering a call.
Derives its power from the Quantec network (no need for a separate power supply unit)
A maximum of 16 QT645s can be connected to a Quantec system.
Mounts on a standard UK 25mm single gang flush or surface back box.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

Quiescent current	1mA.
Indicators	N/A.
Controls	Isolation keyswitch (switches PIR monitoring off when ISOLATED.
Connections	N-; L+; Fault; Switch. Wire as a slave to a QT602 or QT609 Call Point.
Onboard 6.35mm Remote Jack Socket	No.
Onboard Infrared Receiver	No.
Product dimensions (mm)	87 W x 87 H x 29 D mm. Mounts on a UK 25mm single gang back box.
Construction & finish	Plastic.
IP Rating	IP41.
Weight	92g
Operating conditions/temperature	-5ºC to +40ºC. Max. relative humidity 95% non-condensing.