View larger 
Hi-Output W-2.4-8.2 Wall VAD c/w 103dB(A) Sounder (deep base)
BF433A/CX/DR
New
- Third-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by the LPCB.
- Provides 'W-2.4-8.2' light distribution when wall mounted (min 0.4 lux over a 2.4m x8.2m cuboid area).
- Impressive 103dB(A) sound output @ 1m.
- Onboard short-circuit loop isolator.
- 550µA quiescent current.
- 14mA alarm current @24V DC (VAD lit, sounder on max).
- Group addressing facility allows multiple devices to be operated simultaneously.
- 7 selectable volume levels and up to 15 selectable tone pairs.
- IP33C (Type B) rated.
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
- Download Images
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
Technical Specifications
| Approvals/certifications | Certified to EN54-3, 23 & 17 by the LPCB (0832-CPR-F0945). |
| Protocol/compatibility | Compatible with C-TEC's XFP/ZFP XP95/Discovery Addressable Fire Panels. |
| Application/operation | Designed to be wall mounted. IP33C rated and suitable for use outdoors (note an IP65 rated version is also available). |
| VAD category & coverage | W-2.4-8.2 light distribution (min. 0.4 lux over a 2.4m x 8.2m cuboid area). Also certified as a W-4-4 rated VAD. |
| Flash rate & colour | 0.5Hz / White. |
| Supply/operating voltage | 17 to 28V DC (Sounder); 21 to 28V DC (Sounder/VAD). |
| Quiescent current | 550µA @ 24 VDC. |
| Nominal SPL (Sound Pressure Level) | 103dB(A) when set to tone 1. |
| Alarm current | 14mA (VAD lit, Sounder on max). |
| Indicators | Polling (green LED) & Short Circuit Isolator Active (amber LED). |
| Product dimensions (mm) | 114mm diameter x 131mm deep. |
| IP Rating | IP33C (Type B). |
| Weight | 315g. |
| Operating conditions/temperature | -10ºC to +55ºC. Max. 95% RH (Non-condensing). |
Documentation
14 other products in the same category:
-
C-3-8 Addressable Base VAD c/w 96dB(A) Sounder
-
Addressable 96dB(A) Base Sounder
-
C-3-8 Addressable Base VAD
-
Hi-Output W-2.4-8.2 Wall VAD c/w 103dB(A)...
-
Hi-Output 103dB(A) Wall Sounder (shallow base)
-
Hi-Output 103dB(A) Wall Sounder (deep base)
-
Hi-Output W-2.4-8.2 IP65 Wall VAD c/w 103dB(A)...
-
Compact C-3-8 Ceiling VAD c/w 91dB(A) Sounder
-
Compact 91dB (A) Ceiling Sounder
-
Compact C-3-8 Ceiling VAD
-
Compact W-3-3.1 Wall VAD c/w 91dB(A) Sounder
-
Compact 91dB (A) Wall Sounder
-
Compact W-3-3.1 Wall VAD
-
Adaptable Conduit Box
VAD coverage (with multiplication factors applied)
VAD coverage depends on factors such as ambient light and viewing angle (direct or indirect). The table below summarises how the coverage of the BF433A/CX/DR increases or decreases based on these factors. To use the table, calculate the lux level of the area requiring coverage, determine whether the viewing angle will be direct or indirect then read off the coverage in the relevant column. For further information refer to our VAD System Design Guide, downloadable from the Documentation tab below.
| Lux level in area requiring coverage | W-2.4-8.2 Wall Mounted Direct Viewing | W-2.4-8.2 Wall Mounted Indirect Viewing | W-4-4 Wall Mounted Direct Viewing | W-4-4 Wall Mounted Indirect Viewing |
| 000-101 lux | 12.5m H x 42.6m W | 4.3m H x 14.8m W | 20.8m H x 20.8m W | 7.2m H x 7.2m W |
| 101-200 lux | 10.6m H x 36.1m H | 4.1m H x 13.9m W | 17.6m H x 17.6m W | 6.8m H x 6.8m W |
| 201-300 lux | 7.7m H x 26.2m W | 3.4m H x 11.5m W | 12.8m H x 12.8m W | 5.6m H x 5.6m W |
| 301-400 lux | 5.5m H x 18.9m W | 2.9m H x 9.8m W | 9.2m H x 9.2m W | 4.8m H x 4.8m W |
| 401-500 lux | 4.3m H x 14.8m W | 2.4m H x 8.2m W | 7.2m H x 7.2m W | 4.0m H x 4.0m W |
| 501-600 lux | 3.1m H x 10.7m W | 2.1m H x 7.4m W | 5.2m H x 5.2m W | 3.6m H x 3.6m W |
| 601-700 lux | 2.4m H x 8.2m W | not applicable | 4.0m H x 4.0m W | 2.8m H x 2.8m W |
| 701-800 lux | not applicable | not applicable | 2.8m H x 2.8m W | not applicable |
BIM/CAD Drawings
BIM Drawing (REVIT)
This file will be uploaded to our website shortly.
Should you need an urgent copy please contact our
marketing team at marketing@c-tec.co.uk
CAD Drawing (DWG)
This file will be uploaded to our website shortly.
Should you need an urgent copy please contact our
marketing team at marketing@c-tec.co.uk