SigTEL Interface/Network Communication Card

ECU723

New

  • An optional system expansion device.
  • Allows an ECU-224 desk controller to be connected to an ECU-4, 8 or 16 SigTEL controller to simplify call handling on larger SigTEL applications.
  • Mounts inside an ECU-4, 8 or 16 (can also be used to network the ECU-4, 8 or 16 to another controller if required).
  • Not compatible with ECU-8NT controllers.
  • See schematic/full instructions for further details.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Network connectionThe ECU723 transmits speech via a single wiring loop and digital data via two linear RS485 networks. The network should be connected using 4 x 2-core 1.5 mm2 enhanced fire-rated cable. Max. length of all networks is 1 km.
ConnectionsCat 5 patch lead (supplied) connects the ECU723 to a master controller. The ECU-224 desk controller also connects to the ECU723 via a Cat 5 lead.
Product dimensions (mm)92 W x 108 H x 20 D mm.
Weight56g.
NotesWe recommend two separate cable paths be run with each path containing a single speech and single data cable (which should not be mixed in the same cable). Download main ECU-4/8/16 Instructions below for further details.

Documentation

Accessories

8 other products in the same category: