Warning: Last items in stock!
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
|Approvals/certifications||Facilitates compliance with BS5839-9 when correctly installed.|
|Mains supply||230V 50/60Hz.|
|Mains rated current||500mA.|
|Internal power supply||19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).|
|Total output current limited to||1.5A @ 230Vac|
|Quiescent current||100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation.|
|Max battery size and type||2 x 12V 7Ah VRLA connected in series.|
|No. of lines||8.|
|Auxiliary relays||Changeover fault relay (failsafe). 30V 1A max.|
|Open collector outputs||(OP1): Activates when the ECU is ringing; (OP2) Activates when there is an active accessible toilet alarm call; (OP3) Closes when the handset is off hook and remains active for 2 mins after it is replaced. 24V, 50mA max.|
|Other outputs||+24 V. Typically used to supply power to equipment connected to the ECU's open collector outputs (relays, etc).|
|Engineer (AL3) functions||Engineer mode and reset buttons (internal).|
|Indicators||128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on.|
|Controls||Silence Buzzer. Other controls are available but are not applicable as no handset is provided on this unit.|
|Product dimensions (mm)||410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).|
|Construction & finish||Metal lid and base, RAL7035 grey texture.|
|Weight||3.1kg (without batteries).|
|Operating conditions/temperature||-5ºC to +40ºC. Max relative humidity: 95%.|
|Product dimensions:|| 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
|Hole required for semi-flush mounting:||412 W x 255 H x 50 D mm. Requires AFP385 bezel.|