SigTEL 16 Line Master Controller

ECU-16

New

  • A new 16 line Master Controller for use with our SigTEL disabled refuge, fire telephone and stadium marshalling system.
  • Allows operators to communicate with up to four disabled refuge or fire telephone outstations.
  • Includes an attractive semi-recessed handset.
  • Improved SigTEL networking capability allow systems of up to 224 lines to be created with optional/additional desk unit control.
  • Backlit LCD and unique ‘auto-learn’ facility allows fast system set up.
  • Can be semi-flush mounted using an AFP385 bezel.
  • Operation can be maintained for 24 hours (standby) and 3 hours (in use) using 2 x 12V 7 Ahr batteries.
  • Easily interfaced to NC951 accessible toilet alarms, PDA range hearing loop systems, strobes, CCTV activation relays, etc.

    CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Approvals/certificationsFacilitates compliance with BS5839-9 when correctly installed.
Mains supply230V 50/60Hz.
Mains rated current500mA.
Internal power supply19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to1.5A @ 230Vac
Quiescent current100mA (controller with fault buzzer sounding) plus 1mA per Type A outstation and 3.2mA per Type B outstation.
Max battery size and type2 x 12V 7Ah VRLA connected in series.
No. of lines16 (extra lines available on networked systems).
Auxiliary relaysChangeover fault relay (failsafe). 30V 1A max.
Open collector outputs(OP1): Activates when the ECU is ringing; (OP2) Activates when there is an active accessible toilet alarm call; (OP3) Closes when the handset is off hook and remains active for 2 mins after it is replaced. 24V, 50mA max.
Other outputs+24 V. Typically used to supply power to equipment connected to the ECU's open collector outputs (relays, etc).
Engineer (AL3) functionsEngineer mode and reset buttons (internal).
Indicators128 x 64 pixel LCD display; Disablement; System fault; PSU fault; General fault; Power on.
ControlsHandset; Scroll buttons; Hold; Call Accept; Function; Directory; Silence Buzzer.
Expansion connectionsIncreased network capability - details coming soon.
Product dimensions (mm)410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). Handset protrudes 80 mm beyond lid.
Construction & finishMetal lid and base, RAL7035 grey texture.
IP RatingIP20.
Weight3.1kg (without batteries).
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.

Documentation

EVCS Control Panels DoC

Declaration of Conformity (EMC/LVD) DOC0000019 Rev 1

Download (157.92k)

7 other products in the same category:

Dimensions & Mounting Information

Product dimensions: 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). Handset protrudes 80mm beyond lid.
Hole required for semi-flush mounting:412 W x 255 H x 50 D mm. Requires AFP385 bezel.