QT601-2 Quantec Controller View larger

Quantec Controller



  • Supplies power to and controls a Quantec Addressable Call System.
  • Monitors all network devices and manages the routing and distribution of all calls.
  • Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software).
  • Includes a library of 40 pre-set & 45 custom place names.
  • System setup requires a laptop PC running Quantec’s QT707 programming tools.
  • Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure.
  • System wiring requires one or more QT603 network splitters.
  • Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs).


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

Technical Specifications

Mains supply 230V 50/60Hz.
Mains rated current 350mA maximum.
Internal power supply 27Vdc nominal.
Total output current limited to 3A @ 230Vac.
Quiescent current 100mA @ 24V
Max battery size and type 2 x 12V 7Ah VRLA connected in series.
Cabling Spine & limb arrangement using QT603 network splitters. Spines wired in 1.5-2.5mm2 T&E; Limbs wired in 4 core stranded security cable (up to 6 limbs per QT603 splitter). Refer to main instructions for more details.
Open collector outputs OP1 (active on standard call); OP2 (active on help req. call); OP3 (active on emergency call); OP4 (active on attack call). OP5 (failsafe fault output). Voltfree single pole c/o. Max. switch current 25mA; Max. switch voltage 30Vdc.
Other outputs 24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA.
PC connection CONN1 provides an RS232 connection for use with our Quantec Surveyor data management software (via a PC) or a Quantec Printer.
Indicators 2 line x 40 character backlit display; Power LED (lit when power is present, off when no power present).
Controls Accept (A); Scroll Up; Scroll Down; Code Entry Buttons (1, 2, 3 and 4); Escape (E).
Connections Plug-on type, largest acceptable conductor size 1mm2.
Expansion connections CONN2 provides an RS232 connection for paging equipment.
Product dimensions (mm) 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
Construction & finish Metal base, plastic lid.
IP Rating IP30
Weight 3.5Kg.
Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%.


Quantec QT601-2 DoC

Declaration of Conformity (EMC/LVD) DOC0000017 Rev 1

Download (156.23k)


6 other products in the same category: