BF362-5/E 24V 5A Caged Switch Mode PSU View larger

24V 5A Caged Switch Mode PSU to EN54-4/A2



  • Supplied in a finger-protective cage to VDE 0100-410.
  • Includes the same electronics as our BF362-5 VDS certified EN54-4/A2 boxed 24V 3A PSU.
  • Ideal for use in OEM enclosures for powering beam detectors, auto-dial communicators, aspirating smoke detectors, auto-open vent systems, auxiliary sounder systems or any other device performing a mandatory function of a fire alarm system.
  • Deep discharge battery protection and EN54 compliant reporting of battery impedance faults.
  • Includes a single-pole volt-free changeover relay that switches for any fault condition.
  • Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment).
  • Link selectable battery charging capacity.
  • Environmentally-friendly charging circuit - dissipates just 0.35W compared to the industry norm of 2.55W.
  • Supplied in a tough, durable metal box.
  • Optional 'PCB-only' versions available (order code BF362-5/C).


By buying this product you can collect up to 21 loyalty points. Your cart will total 21 points that can be converted into a voucher of $4.20.

By buying this product you can collect up to 21 loyalty points. Your cart will total 21 points that can be converted into a voucher of $4.20.

Technical Specifications

Approvals/certificationsIncludes the same electronics as our EN54-4/A2 VdS certified BF362-5 PSU.
Application/operationA caged Mains to regulated DC power supply providing 5A @ 24V DC for mounting in OEM enclosures. Full compliance with all relevant standards must be checked by the responsible person with the caged PSU installed in a suitable enclosure.
Mains supply230V 50/60Hz.
Mains rated current1.35A maximum. (310 VA).
Total output current limited to5A (Max. continuous output current).
Output4.6A DC current or 4A DC current (I max a, if PLK2 link fitted), 1A charge current; 5A DC current (I max b, charging turned off).
Battery charge capacity7 Ah to 18 Ah.
IndicatorsSupply Present (Green); General Fault (Amber); Auxiliary Fault (Amber); Hazardous Voltages Present (Red).
ConnectionsMains Input (CONN1); Supply Output (CONN5); Battery Input (CONN5); Fault Relay (CONN4); Charge Off Input (CONN4). Battery Monitoring On/Off Link (PLK1); Battery Charge Current Link (PLK2); High Temp. Output (PL2).
Product dimensions (mm)173 W x 143 H x 66 D mm.
Construction & finishZintec cage.
IP RatingDependent on mounting enclosure.
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.
NotesThe BF362-5/E must be installed in a suitable enclosure (not supplied) which must withstand the operating conditions of the PSU. Adequate ventilation must be provided and component temperature limits must not be exceeded. See main instructions.


20 other products in the same category: