View larger

1000m2 Wall Mounting Phase-Array Hearing Loop Amplifier

Part No. PDA11/DW

Condition New

A new wall-mounting 2 x 7.5A phase-array hearing loop amplifier ideal for use in areas up to 1000m2.
Intuitive LED interface allows simple set-up of input levels, output current, phantom power and metal compensation
2 x XLR mic/line inputs (selectable) and 1 outreach connector
Anti-tamper lock function
Class D output stage for maximum efficiency.
Superior audio processing and powerful CPU provide life-like speech and first class music reproduction
Fault relay & LED indicators provide clear indication of operation and fault status
Industry leading dual action automatic gain control compensates for poor microphone technique
Line level output for recording or daisy-chaining multiple units to cover larger areas.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

Type	Wall-mounting (requires a permanent 5A fused spur connection to Mains).
Coverage	1000m2 approx.
Mains supply	230V 50Hz.
Output	2 x 7.5A loop drive current @ 1 Ohm; Loop output volage 14V.
Max battery size and type	n/a.
Auxiliary inputs	2 x XLR mic/line inputs with switchable 12V phantom power (on or off); Outreach and Optical TOS Link connectors.
Indicators	VU Meter (shows the amplitude of the audio); HOT! (lit if the output stage is getting hot); FAULT1 / FAULT2 (lit if loop 1 or loop 2 has shut down because of overheating or excessive current; POWER (lit when the amplifier is receiving power).
Controls	Line Input, Microphone, 12V Phantom, Outreach, Metal Comp, Loop Drive 1, Loop Drive 2, Phase Shift.
Connections	Mic (3-way pluggable); Line In (3-way connectors); Loop (4 way connector); Outreach (4-way pluggable connector); Line Out (3-way pluggable connector); Fault Relay (3-way pluggable connector); Optical; 230Va.c. fixed Mains connector..
Product dimensions (mm)	298 (H) x 308 (W) x 74 (D) mm.
Construction & finish	Mild steel zintec, 1mm thick, black powder coated
IP Rating	IP40.
Weight	3.35kg
Operating conditions/temperature	-5ºC to +40ºC. Max relative humidity: 95%.