View larger

24V 1A Regulated Power Supply

Part No. BF375M

Condition New

A general purpose mains to regulated 24V d.c. power supply unit intended for use in fire alarm systems of all sizes.
Includes a built-in 24V double pole changeover relay.
Provides a stabilised output of 27.6V
Mains On, Battery/PSU Fault and Output Triggered indicators.
Trigger and hold off inputs can be used to control the internal relay.
Optional back-up batteries can be fitted to maintain the output in the event of mains failure.

By buying this product you can collect up to 21 loyalty points. Your cart will total 21 points that can be converted into a voucher of $4.20.

By buying this product you can collect up to 21 loyalty points. Your cart will total 21 points that can be converted into a voucher of $4.20.

Application/operation	A boxed Mains to regulated DC power supply providing 1A @ 24V DC c/w with an on-board relay.
Mains supply	230V 50/60Hz.
Output	1A @ 27V DC. (100mV ripple).
Battery charge capacity	1.2 Ah to 2.1 Ah.
Quiescent current	15mA max.
Max battery size and type	2 x 12V 2.1 Ah VRLA (for approx. 80 hours stand by). Note 2 x 12V 1.2Ah VRLA will typically provide 36 hours standby.
Open collector outputs	Fault monitor: Normally off; Max. off voltage: +27 V DC; Max. current when on: 50mA.
Indicators	Mains On, Battery/PSU Fault and Output Triggered.
Controls	Trigger input: +5-27V DC (max. current 1mA;) Hold Off Input: +5-27V DC (max. current 1mA). Voltages with respect to 0V.
Connections	Hold off; Trigger; Fault Output; 0V; N/O; N/C; +24V.
Product dimensions (mm)	271 W x 200 H x 70 D mm.
Construction & finish	Hinged metal lid with grey and white label; Metal base.
IP Rating	IP30.
Weight	2.3kg (without batteries).
Operating conditions/temperature	-5ºC to +40ºC. Max relative humidity: 95%.