View larger

10-20 Zone Expansion Unit for NC910F or NC920F

Part No. NC910EF, NC920EF

Condition New

Expands the number of zones on an NC910F or NC920F Call Controller by 10 or 20 zones (dependent on model purchased).
Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm.
Includes 10 or 20 Zonal Alarm LEDs capable of indicating Standard and Emergency Calls. Note this expansion controller does not include on onboard buzzer as audible call indication will come from the master controller it is connected to.
NC910EF provides 10 extra zones, NC920EF provides 20 extra zones.
Innovative slide-in labelling system.
Optional horizontal (NCBOXAS) and vertical (NCBOXAL) alignment plates available to aid the installation of controllers and expansions units located alongside each other.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.

Quiescent current	0mA (none).
Alarm current	Determined by the number/type of field devices connected to the call controller/system.
Indicators	Green Power on LED; 10 (NC910EF) or 20 (NC920EF) red Zonal Alarm LEDs (lit steady for a Standard call, pulse for an Emergency call); Audible call indication will come from the separate master call controller.
Controls	None. 2 Buttons - (A) Reset or inactive ; (B) 'Mute' or 'Call Accept' available via NC910S or NC920S master controller.
Call acknowledgement functionality	Yes.
Product dimensions (mm)	214 W x 178 H x 70 D mm (overall). Hole required for flush mounting is 176 W x 162 H x 55 D mm.
Construction & finish	Plastic detachable lid and back box. RAL7035.
IP Rating	IP41.
Weight	1.47kg.
Operating conditions/temperature	-5ºC to +40ºC. Max. relative humidity 95% non-condensing.

DNU0920000 Rev 5

Microsoft Word Document

Declaration of Conformity (EMC/LVD) DOC0000010 Rev 1

Product dimensions:	214 W x 178 H x 70 D mm.
Hole required for flush mounting:	176 W x 162 H x 55 D mm. No bezel required.
Optional horizontal (NCBOXAS) and vertical (NCBOXAL) alignment plates available to aid the installation of controllers and expansions units located alongside each other.

NC920EF/910EF Expansion Unit BIM (RFA)