NC812KE, NC822KE, NC832KE
Warning: Last items in stock!
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
|Mains supply||230V 50/60Hz. (Max. current TBC).|
|Internal power supply||13.5V d.c. (400mA max. current when powered by Mains).|
|Quiescent current||0mA (none).|
|Max battery size and type||12V 2.1Ah VRLA.|
|Alarm current||Determined by the number/type of field devices connected to the indicator panel/system.|
|Auxiliary relays||2 volt free relay contacts (NO/C/NC). Relay 1 activates on a standard call and pulses on an emergency call; Relay 2 activates on a emergency call. Both relays rated at 500mA @ 12V d.c.|
|Indicators||10 (NC812KE), 20 (NC822KE) or 30 (NC832KE) red Zonal Alarm LEDs. Lit steady for a Standard call, pulse for an Emergency call); Internal buzzer (on steady for any Standard call, intermittent for any Emergency call).|
|Controls||Optional mute button.|
|Expansion connections||Connections provided for up to 10 repeater panels and 3 remote sounders.|
|Call acknowledgement functionality||No. If required use an NC910 or NC920 10 or 20 Zone Call Controller instead.|
|Product dimensions (mm)||397 W x 83 H x 87 D mm. Surface mounting.|
|Construction & finish||Metal.|
|Operating conditions/temperature||-5ºC to +40ºC. Max. relative humidity 95% non-condensing.|
|Product dimensions||406 W x 214 H x 98 D mm. Surface mounting.|
|NC812KE||10 Emergency Indicator Panel c/w 12V 400mA PSU and optional mute button.|
|NC822KE||20 Emergency Indicator Panel c/w 12V 400mA PSU and optional mute button.|
|NC832KE||30 Emergency Indicator Panel c/w 12V 400mA PSU and optional mute button.|
|NC811KE||10 Emergency Repeater Panel|
|NC821KE||20 Emergency Repeater Panel|
|NC831KE||30 Emergency Repeater Panel|
NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, Standard and Emergency calls can be indicated via its buzzer and zonal LEDs. An optional Mute button is also provided to allow the user to silence standard calls.
STANDARD CALLS: when triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steady.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel's internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
EMERGENCY CALLS: when triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the Panel. An emergency call can only be reset at the device from which it was triggered or via a reset point, wired on the same zone.