Hush-Pro Landlord System Interface (Apollo XP95/Discovery Protocol)

To unleash the full power of Hush-Pro you can connect multiple stand-alone Hush-Pro systems to a communal C-TEC XFP or ZFP CAST protocol addressable fire alarm system or a C-TEC ZFP Apollo XP95/Discovery protocol fire alarm system.

• Use the Cause & Effect programming of the communal XFP or ZFP fire panel to set-up building management approved phased evacuation scenarios that don't put peoples' lives at risk.
• Program keyswitches at the communal fire panel that allow the emergency services to evacuate groups of dwellings and/or floors of dwellings without having to climb staircases.
• Report wiring faults, Fire Level 1 triggers (e.g. optical detector activated) and Fire Level 2 triggers (heat detector activated or optical detector activated for a prolonged pre-set period) to off-site monitoring centres to ensure potential dangers are reported in real time.

• When the Hush-Pro system is in its normal state, power is applied to its detection and alarm circuit which is continually monitored for open and short circuit faults.
• When a fire detector within a dwelling triggers, the system's Alarm sounders and VADs will activate.
• Depending on the system's configuration, a remote overdoor indicator outside the room and/or cooker shut-off relays may also activate.
• If multiple Hush-Pro systems are connected to a compatible communal fire system, automatic phased evacuation, manual fire brigade evacuation and the off-site reporting of faults and fires may also be possible (see Networked HUSH2 Systems tab above for more details).

Some of the operational options available on Hush-Pro are:-

• A HUSH/SILENCE FUNCTION
  Allows a hushed period of two minutes to be applied (and extended if required) for the management of false alarms
• A 'HOT WORKS' FUNCTION
  Allows a hushed/isolation period of fifteen minutes to be applied (and extended if required) to protect against inadvertent activation.
• A 'TEST' FUNCTION
  Allows the functionality of the system's detectors and alarm devices to be electronically tested with relevant faults indicated via the controller's fault status LED.

• Fully compliant with the latest revision of BS 5839-6 - upgrades the level of protection offered in a dwelling from the minimum Grade D requirement to Grade C.
• Provides individual dwellings with an extendable two-minute silence facility and 15-minute isolate facility.
• Mains powered via a separate double gang PSU with onboard 72 hour standby supply
• Long-life replaceable Lithium Ion rechargeable battery (up to 12 years' life)
• Wiring between all detection and alarm devices is fully open and short circuit monitored
• Silence, Test and Fault Status indicators & controls can be viewed or operated at floor level and are therefore suitable for use by the elderly and disabled.
• Four indicator LEDs - green Supply LED, yellow Fault LED, red Alarm LED and yellow Hushed LED.
• Auxilliary interface connections to remote systems, e.g. communal fire alarm systems
• Manufactured in the UK by one of the world's leading commercial fire system providers.

For a full list of features and benefits please download the Hush-Pro Key Advantages datasheet in the tab below.

HP733/XP BIM (RFA)

DOWNLOAD

HP733/XP with back box BIM (RFA)

DOWNLOAD