HP414 Hush-Pro Multi Sensor Fire Detector View larger

Hush-Pro Multi Sensor Fire Detector

HP414

New

  • A high-quality multi-sensor fire detector for use with C-TEC's HP508 Hush-Pro BS5839-6 Grade C Controller.
  • Certified to EN54-5, 7 & 17 by the LPCB (pending).
  • Onboard A2 heat & optical 0.2dB/m smoke sensors make it deal for detecting a wide range of fires whilst also reducing false alarms.
  • Smart algorithms help reduce false alarms.
  • Drift compensation functionality.
  • 0.16dB/M sensitivity/obscuration level.
  • Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
  • Compatible with our HP508 Hush Controller.
  • Up to 8 field devices (detectors, sounders and/or I/O units) per Controller. Up to 8 additional field devices can be connected but this may impact on battery standby times. 

  CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Approvals/certificationsCertified to EN54-5, 7 & 17 by the LPCB (pending).
CompatibilityCompatible with C-TEC's HP508 Hush-Pro Controller.
TypeMuti-Sensor (Heat assisted optical 0.2dB/m + A2 heat).
Application/operationAs well as operating independently, the CA414’s smoke & heat sensors combine to produce a sensitive response to freely burning fires, e.g. when a rise in heat is detected, its smoke response level reduces for improved detection and reduced false alarms.
Application temperature25°C typical, 50°C max.
Static response temperature54°C min, 65°C max.
Sensitivity0.2dB/m optical; A2 heat.
Supply wiring2-wire monitored, polarity sensitive.
Supply/operating voltage27 to 40V DC.
Quiescent current370uA - 5mA @ 24V.
Alarm current6mA (LEDs illuminated).
Indicators2 LED indicator strips emitting red light when in alarm offering 360º visibility. Optional remote LED.
ConnectionsVia HP408 base: 1 +Ve IN (analogue swich); 2 +Ve OUT (analogue switch); 3 Remote LED +Ve; 4 0V; 5 0V; 6 Screen; 7 Screen.
Expansion connectionsRemote LED output available via HP408 or 408R base. Current source to the negative line, short-circuit protected. Max voltage 2.7V DC.
Product dimensions (mm)102.2mm diameter x 37mm deep (detector in base); 102.2mm diameter x 57.5mm deep.
Construction & finishWhite polycarbonate casing rated to UL94 V-2 with nylon parts.
IP RatingIP42.
Weight99g (not in base); 154g (in base).
Operating conditions/temperature-20ºC to +85ºC.
NotesRequires a HP408 Hush-Pro base. HP408R relay base also available.

3 other products in the same category: