HUSH-ACTIV BS 5839-6 Grade C Stand-Alone Domestic Fire Alarm Kit
HAK/1
New
- A new Grade C domestic fire detection & alarm system to BS 5839-6 (2019) for use in individual flats, houses and apartments.
- Supplied as a cost-effective kit for ease of specification.
- Includes a Hush-ActiV central controller, a 230V/24V PSU, one ActiV heat detector, one ActiV smoke detector, one ActiV multi-sensor, three ActiV detector bases and an ActiV alarm sounder (additional ActiV devices available for larger systems).
- Monitored for battery, power supply, detector removal & open/short circuit faults.
- Low-level system controller facilitates compliance with the Equality Act.
- Controller includes a replaceable 72 hour standby battery that lasts over 10 years in normal usage.
- Can be used in any situation where Grade D Mains/Battery Alarms are specified.
- Kits with a different mix of fire detectors also available.
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
- Download Images
- Download datasheet
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
Technical Specifications
| Compatibility | Compatible with C-TEC's ActiV range of conventional fire alarm devices. For the contents of this kit, see Kit Contents section below. |
| Total output current limited to | 100mA |
| Battery charge capacity | 2Ah. |
| Quiescent current | 5mA. |
| Max battery size and type | 2Ah Li-Ion battery supplied (replaceable, up to 10 year life). |
| No. of detector zone circuits | 1. |
| No. of conventional sounder circuits | 1. |
| Indicators | 4 x LEDs on Hush Controller: Supply (green); Fault (yellow); Alarm (red); Hushed (amber). |
| Controls | 1 x TEST button; 1 x HUSH button. |
| Onboard Sounder | Yes. Provides audible feedback of a fire/fault condition. |
| Product dimensions (mm) | Hush Controller: 146 W x 85 H x 25 D mm (Can be mounted on a standard UK 35mm double gang flush or surface back box). |
| Construction & finish | Supplied on a double gang plastic plate. |
| IP Rating | IP40. |
| Weight | 160g. |
| Operating conditions/temperature | -5ºC to +40ºC. Max relative humidity: 95%. |
| Kit contents | Includes a Hush-ActiV central controller, a 230V/24V PSU, one ActiV heat detector, one ActiV smoke detector, one ActiV multi-sensor, three ActiV detector bases and an ActiV alarm sounder. |
Documentation
3 other products in the same category:
Video overview
HAK/1 Kit Contents
1 x Double Gang Hush-ActiV Controller c/w 72 hour standby battery
1 x Double Gang 230V/24V 250mA PSU
1 x ActiV multi sensor
1 x ActiV smoke detector
1 x ActiV 60ºC heat detector
3 x ActiV diode detector bases
1 x ActiV base sounder
1 x lid for base sounder
Optional decor plates available for use with ceiling mounted ActiV devices to cover the decorating marks left when used to retrofit older Grade D alarm devices.
Why Hush-Activ?
SAFER
Raises the typical level of fire protection in a dwelling from BS 5839-6 Grade D (unmonitored Mains/Battery Alarms) to Grade C (monitored wiring and a central controller)
EASY-TO-ACCESS USER CONTROLS
No need to stand on a chair to Test or Hush/Silence devices
SECURE MONITORED WIRING
All field wiring monitored for open and short circuit faults
ENVIRONMENTALLY FRIENDLY
Up to 50% reduction in the mains power consumption of a typical Grade D system, less plastic and only one replaceable lithium-ion battery per system providing over 72 hours standby
REDUCED LIFETIME OWNERSHIP COSTS
Separate fire detectors and sounders are less expensive to replace than Mains/Battery Alarms and all smoke detectors have built-in drift compensation to increase service life expectancy
NO INTRUSIVE BS 5839-1 MAINTENANCE VISITS
Monthly user/occupant test is sufficient
DIRECT GRADE D SYSTEM UPGRADES
Utilises the same wiring scheme as most Mains/Battery Alarm solutions
Hush-Activ Operation
- Press HUSH when there is an Unwanted Alarm to silence the system for 2 minutes (extendable by a further 2 minutes if the Alarm has not cleared). Press TEST for 3 seconds when the system is in its normal state to briefly sound the Alarm sounder(s). BS 5839-6 2019 recommends this test is carried out by occupants at least once a month.
- Press HUSH when a wiring or battery fault is detected to silence the fault buzzer for 24 hours. Occupants should report the fault to the responsible person/service engineer at their earliest convenience
- Press HUSH when the system is in its normal state to deactivate alarm detection for 15 minutes (’hot works’ function).