Red Fire Telephone Outstation c/w Handset (key lockable)

EVC301RLK

New

  • An attractive Type A fire telephone outstation c/w telephone-style handset.
  • Supplied in a durable 'lift key' lockable red steel case.
  • Ideal for use in fire telephone and stadium marshalling applications.
  • Allows stewards and fire marshals to communicate with a SigTEL Master Controller (and vice versa).
  • Facilitates reliable two-way communication in a fire emergency between a permanently manned control room and key points of a site.
  • True duplex speech.
  • Can be surface mounted using a T-BEZ302 bezel.
  • Meets and exceeds the requirements of BS 5839-9 when correctly installed.

CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Approvals/certifications Facilitates compliance with BS5839-9 when correctly installed.
Supply/operating voltage 11V DC derived from a compatible SigTEL Master Controller (drops to 6 V DC when in use).
Quiescent current 1mA
Activation current 25mA (current draw when handset is in use).
Open collector outputs None.
Indicators When the operator in the control room calls the outstation, a pulsed ringing tone sounds at the outstation.
Controls Lift-key lock mechanism (a lift lock key must be issued by the person responsible for the system to all relevant personnel); Telephone-style handset (lift to answer or make a call).
Expansion connections None.
Product dimensions (mm) 202 W x 278 H x 100 D mm.
Construction & finish Red steel (RAL 3000).
IP Rating IP20.
Weight 3 kg.
Operating conditions/temperature -5ºC to +40ºC. Max relative humidity: 95%.
Notes Microphone frequency response 250 Hz to 5 kHz ±3 dB; Loudspeaker frequency response 250 Hz to 4 kHz ±3 dB.

Documentation

EVCS Type A Outstations DoC

Declaration of Conformity (EMC/LVD) DOC0000021 Rev 1

Download (157.43k)

1 other products in the same category:

Dimensions & Mounting Information

Product dimensions: 202 W x 278 H x 100 D mm. Designed for surface mounting.
Hole required for optional semi-flush mounting: TBC. Requires a T-BEZ301 bezel.

BIM/CAD Drawings

EVC301RLK Flush mounted BIM (RFA)

Download

EVC301RLK Surface mounted BIM (RFA)

Download