Hush-Pro Domestic Interface Units
Hush-Pro Domestic Interface Units There are 5 products.
-
Hush-Pro Fire Level 2 Mains Switching I/O Module
HP732 Hush-Pro Fire Level 2 Mains Switching I/O Module
HP732Can be used with third party devices to trigger a Fire Level 2 (Global Alarm) on a Hush-Pro Domestic Fire Alarm System. Output stage can be used for cooker shut off. Certified to EN54-17 & 18 by the LPCB. HP731 Fire Level 1 (Local Alarm) Mains Switching I/O units also available. Can be used with third party devices to trigger a Fire Level 2 (Global Alarm) on a Hush-Pro...
-
Hush-Pro Fire Level 1 Mains Switching I/O Module
HP731 Hush-Pro Fire Level 1 Mains Switching I/O Module
HP731Can be used with third party devices to trigger a Fire Level 1 (Local Alarm) on a Hush-Pro Domestic Fire Alarm System. Output stage can be used for cooker shut off. Certified to EN54-17 & 18 by the LPCB. HP732 Fire Level 2 (Global Alarm) Mains Switching I/O units also available. Can be used with third party devices to trigger a Fire Level 1 (Local Alarm) on a Hush-Pro...
-
Hush-Pro Fire Level 1 Mini I/O Module
HP734 Hush-Pro Fire Level 1 Mini I/O Module
HP734A miniature I/O Module specifically designed for use with a Hush-Pro domestic fire alarm system. Can be used to (1) activate a third-party device when there is a Fire Level 1 Alarm on a Hush-Pro System and/or (2) to trigger a Fire Level 1 Alarm on a Hush-Pro system when a third-party device activates. Includes an onboard, bi-directional, short-circuit... A miniature I/O Module specifically designed for use with a Hush-Pro domestic fire alarm system....
-
Hush-Pro Fire Level 2 Mini I/O Module
HP735 Hush-Pro Fire Level 2 Mini I/O Module
HP735A miniature I/O Module specifically designed for use with a Hush-Pro domestic fire alarm system. Can be used to (1) activate a third-party device when there is a Fire Level 2 Alarm on a Hush-Pro System and/or (2) to trigger a Fire Level 2 Alarm on a Hush-Pro system when a third-party device activates. Includes an onboard, bi-directional, short-circuit... A miniature I/O Module specifically designed for use with a Hush-Pro domestic fire alarm system....
-
Flood Sensor (CAST/Hush-Pro Compatible)
CA741 Flood Sensor (CAST/Hush-Pro Compatible)
CA741A C-TEC manufactured flood sensor specifically designed to connect to a CAST or Hush-Pro I/O unit to signal an alarm condition when water is detected. Mounts vertically with the sensor's exposed PCB tracks at floor level. Removable low and side entry bungs allow water to enter the device in a flood situation. When water is detected the sensor will... A C-TEC manufactured flood sensor specifically designed to connect to a CAST or Hush-Pro I/O unit...