View larger 
Brushed Stainless Steel Disabled Refuge Outstation, flush
EVC302F
New
- An attractive Type B disabled refuge outstation.
- Stylishly finished in high-guality, brushed stainless steel.
- Suitable for use with C-TEC's SigTEL disabled refuge / emergency voice communication system.
- Allows anyone located in a disabled refuge area to communicate with a SigTEL Master Controller at the touch of a button (and vice versa).
- Offers true duplex speech.
- Features a ‘Push to Call or Answer’ button, a 'Call in Progress' LED, buzzer, microphone and loudspeaker.
- Includes connections for an optional induction loop system and a general-purpose open collector output that closes on activation of the unit.
- Meets and exceeds the requirements of BS 5839-9 when correctly installed.
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
- Download Images
- Download datasheet
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
Technical Specifications
| Approvals/certifications | Facilitates compliance with BS5839-9 when correctly installed. |
| Supply/operating voltage | 11V DC derived from a compatible SigTEL Master Controller (drops to 6 V DC when in use). |
| Quiescent current | 3mA |
| Activation current | 25mA (current draw when intercom is in use). |
| Open collector outputs | O/P +Ve & O/P –Ve (closes when outstation is active, typically used to trigger a third party CCTV camera, opto-isolated, normally open, max. 24 V DC, 3 mA). |
| Indicators | Red call in progress LED |
| Controls | External 'Push to Call or Answer' button (Off Hook); Internal Loudspeaker volume control; Engineer’s “On Hook” and “Off Hook” pins. |
| Expansion connections | AFILS +Ve & AFILS –Ve (typically connected to the line-level input of an optional induction loop amplifier): Off-Hook and -Ve (can be optionally connected to an NC951 accessible toilet alarm kit (see instructions for details). |
| Product dimensions (mm) | 175 W x 250 H x 53 D mm. Hole required for flush mounting: 156 W x 232 H x 51mm D approx (no bezel required). |
| Construction & finish | Brushed stainless steel. |
| IP Rating | IP20. |
| Weight | 1.5 kg. |
| Operating conditions/temperature | -5ºC to +40ºC. Max relative humidity: 95%. |
| Notes | Microphone frequency response 250 Hz to 5 kHz ±3 dB; Loudspeaker frequency response 250 Hz to 4 kHz ±3 dB; Audio output level: 0 dB (775 mV) balanced line. |
Documentation
Accessories
4 other products in the same category:
Dimensions & Mounting Information
| Product dimensions: | 160 W x 240 H x 53 D mm. Designed for flush mounting only. |
| Hole required for flush mounting: | 156 W x 232 H x 51mm D approx (no bezel required) |