View larger 
Quantec Display Interface
QT615S
New
- Allows a QT608CD1S large corridor display to be connected to Quantec via an RS232 serial interface lead (supplied with the large display).
- Mounts on a standard UK 20mm double gang flush or surface back box.
- The data connection to the large display is monitored. If this is disconnected or the large display is switched off then the QT615S appears as “Missing” on the Quantec controller
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
- Send to a friend
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.
Technical Specifications
| Power requirements | Nominal 24V DC (from Quantec Controller/Network). |
| Quiescent current | Less than 5mA. |
| Indicators | None. |
| Controls | None. If controls are required use a QT608C display. |
| Connections | Net +: Net -; RS232 serial port. |
| Product dimensions (mm) | 147 W x 86 H x 23 D mm. Mount on a 35mm deep double gang back box. |
| Construction & finish | Plastic. |
| IP Rating | IP41. |
| Weight | 260g. |
| Operating conditions/temperature | -5ºC to +40ºC. Max relative humidity: 95%. |
Documentation
Quantec Universal Devices DoC
Declaration of Conformity (EMC/LVD) DOC0000055 Rev 1
Download (157.83k)Accessories
3 other products in the same category:
Dimensions & Mounting Information
| Product dimensions: | 146 W x 87 H x 36 D mm. Mounts on a 20mm UK double gang back box. |