> Two-Wire Fire Systems>AlarmSense Sounders & Visual Indicators>AlarmSense Base Sounder/Visual Indicator
AlarmSense Base Sounder/Visual Indicator View larger

AlarmSense Base Sounder/Visual Indicator

45681-509APO

New

  • Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
  • 70d-87dB(A) sound output (visual indicator activates with sounder).
  • Certified to EN54-3 by UL International (UK) Limited.
  • Suitable for use with C-TEC's CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
  • AlarmSense priority/non priority signal recognition
  • Detects the removal of a detector head and reports a fault
  • Continues to work during unauthorised removal of detector.
  • High and low volume ranges.
  • Red and white caps available for stand-alone use.
  • Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Approvals/certifications Certified to EN54- by by UL International (UK) Limited.
Application/operation Designed to be ceiling mounted with an AlarmSense fire detector. Red and White caps available for stand alone use.
Supply wiring 2-wire monitored, polarity insensitive.
Supply/operating voltage 18-33VDC (sounders active); Less than 15VDC (sounders off).
Quiescent current Less than 20µA @ 12VDC.
Nominal SPL (Sound Pressure Level) 87dB(A) max (high volume setting); 70dB(A) nominal (low volume setting).
Alarm current 5mA (sounder active current at 24V).
Product dimensions (mm) 115mm diameter x 40mm deep (without optional AlarmSense detector).
Construction & finish White/clear polycarbonate. Red and white caps available for stand alone use.
IP Rating TBC.
Weight 150g.

3 other products in the same category:

Spares & Accessories

BF330ASLIDR AlarmSense 45681-295 Red Cap
BF330ASLIDW AlarmSense 45681-294 White Cap

Combination AlarmSense Devices

This device is also available as part of an AlarmSense detector/sounder visual indicator base combination. A full list of AlarmSense combination devices appears below.

BF302ASHC 55000-196 AlarmSense Standard Rate of Rise Detector and Sounder Base Combination.
BF302ASHHC 55000-197 AlarmSense High Temperature Detector and Sounder Base Combination.
BF302ASHC1 55000-198 AlarmSense Standard Rate of Rise Detector and Sounder Visual Indicator Base Combination.
BF302ASHHC1 55000-199 AlarmSense High Temperature Detector and Sounder Visual Indicator Base Combination.
BF316ASHC 55000-392 AlarmSense Optical Detector and Sounder Base Combination.
BF316ASHIC 55000-393 AlarmSense Integrated Optical Detector and Sounder Base Combination.
BF316ASHC1 55000-394 AlarmSense Optical Detector and Sounder Visual Indicator Base Combination.
BF316ASHIC1 55000-395 AlarmSense Integrated Optical Detector and Sounder Visual Indicator Base Combination.