XFP 1-2 Loop Fire Panels
Create powerful yet cost-effective addressable fire systems with C-TEC's revolutionary new range of CAST XFP 1-2 loop panels. Designed to integrate seamlessly with an extensive range of C-TEC manufactured CAST devices, XFP CAST panels have all the qualities of our existing XFPs plus the added advantage of CAST's 255 devices per loop and 40V 500mA loop drivers.
XFP 1-2 Loop Fire Panels There are 12 products.
XFP 1 Loop 16 Zone Addressable Fire Panel (C-TEC CAST protocol)
XFP501E/CA XFP 1 Loop 16 Zone Addressable Fire Panel (C-TEC CAST protocol)
XFP501E/CAC-TEC's tried and trusted XFP single loop 16 zone addressable fire alarm panel - now available with C-TEC's own digital fire alarm system protocol, CAST. With a powerful 40V 500mA loop driver allowing the connection of up to 255 CAST devices, the installation of a cost-effective, feature-packed addressable fire alarm system has never been easier. Always... C-TEC's tried and trusted XFP single loop 16 zone addressable fire alarm panel - now available...
XFP 1 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)
XFP501/CA XFP 1 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)
XFP501/CAC-TEC's tried and trusted XFP one loop 32 zone addressable fire alarm panel - now available with C-TEC's own digital fire alarm system protocol, CAST. With a powerful 40V 500mA loop driver allowing the connection of up to 255 CAST devices, the installation of a robust, feature-packed addressable fire alarm system has never been easier. Always thought of... C-TEC's tried and trusted XFP one loop 32 zone addressable fire alarm panel - now available with...
XFP 2 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)
XFP502/CA XFP 2 Loop 32 Zone Addressable Fire Panel (C-TEC CAST protocol)
XFP502/CAC-TEC's tried and trusted XFP two loop 32 zone addressable fire alarm panel - now available with C-TEC's own digital fire alarm system protocol, CAST. With two powerful 40V 500mA loop drivers allowing the connection of up to 255 CAST devices per loop, the installation of a robust, feature-packed addressable fire alarm system has never been easier.... C-TEC's tried and trusted XFP two loop 32 zone addressable fire alarm panel - now available with...
Fire Alarm Control Panel Mains Keyswitch
BF319 Fire Alarm Control Panel Mains Keyswitch
BF319A high-quality lockable double pole Fire Alarm Control Panel Mains Keyswitch. Allows the Mains supply to a fire alarm panel to be switched on or off in accordance with BS 5839-1. Ideal for use during routine test and maintenance (e.g. battery test, main board replacement etc). Note, if working on the Mains in the panel you must also follow correct... A high-quality lockable double pole Fire Alarm Control Panel Mains Keyswitch. Allows the Mains...
XFP Network Driver Card
XFP761 XFP Network Driver Card
XFP761An optional system expansion device for use with C-TEC's XFP Single Loop 16 Zone addressable fire panels. Allows the connection of up to eight XFP Repeaters or eight XFP Main panels (any mix). One XFP761 required per networked Main XFP Single Loop 16 Zone fire panel (note that XFP510-16 and XFP510-32 repeaters include a network driver card as standard).... An optional system expansion device for use with C-TEC's XFP Single Loop 16 Zone addressable fire...
XFP Network Driver Card
AFP711 XFP Network Driver Card
AFP711An optional system expansion device for use with XFP 1/2 Loop 32 Zone fire panels. Allows the connection of up to eight XFP Repeaters or eight XFP Main panels (any mix) on an RS485 network. One AFP711 card required per networked Main XFP 1/2 Loop 32 Zone panel (note that XFP510-16 and XFP510-32 repeaters include a network driver card as standard). The... An optional system expansion device for use with XFP 1/2 Loop 32 Zone fire panels. Allows the...
XFP 16 Zone Repeater Panel (all protocols)
XFP510-16 XFP 16 Zone Repeater Panel (all protocols)
XFP510-16Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances). Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3). Includes an on-board fault relay. Requires its own dedicated Mains power and battery back-up supply. A maximum of eight XFP Repeaters... Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all...
XFP 32 Zone Repeater Panel (all protocols)
XFP510-32 XFP 32 Zone Repeater Panel (all protocols)
XFP510-32Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all potential fire service entrances). Offers all of the functions and controls of an XFP Main panel (access levels 1, 2 and 3). Includes an on-board fault relay. Requires its own dedicated Mains power and battery back-up supply. A maximum of eight XFP Repeaters... Can be used to repeat the functions of an XFP Main panel at remote parts of a site (e.g. all...
Flush Mounting Bezel for XFP 32 Zone Masters & Repeaters
XFP385 Flush Mounting Bezel for XFP 32 Zone Masters & Repeaters
XFP385Allows XFP 1-2 Loop 32 Zone Fire Panels to be semi-flush mounted. Attractive slimline design. Finished in mild steel. Front face when in situ measures 456 W x 293 H mm. Hole required to accomodate the bezel and the fire panel is 412 W x 255 H x 50 D mm. Allows XFP 1-2 Loop 32 Zone Fire Panels to be semi-flush mounted. Attractive slimline design....
Glazed Stainless Steel Enclosure, shallow
BF359/3S Glazed Stainless Steel Enclosure, shallow
BF359/3SAn attractive flush-mounting glazed stainless steel enclosure ideal for housing a number of C-TEC-manufactured control panels. Compatible products include XFP 1-2 loop 32 zone fire panels and Quantec controllers. Optional BF359/3CL (Camlock kit) or BF359/3SL (Electromagnetic solenoid lock kit) also available. Helps protect control equipment from... An attractive flush-mounting glazed stainless steel enclosure ideal for housing a number of...
XFP Upload/Download Programming Tools
XFP507 XFP Upload/Download Programming Tools
XFP507PC programming tools for use with C-TEC's XFP range of addressable fire alarm control panels. Intuitive and easy-to-use with comprehensive Help files. Requires a PC running Windows XP, Vista, 7, 8 or 10. Kit includes a CD and a 2m long SAF7070000 programming lead (4-way molex to 9-way RS232 'D' female) Optional RS232 to USB convertor available (see... PC programming tools for use with C-TEC's XFP range of addressable fire alarm control panels....
Red Plastic Fire Panel Key
S-KEY Red Plastic Fire Panel Key
S-KEYA spare plastic S-KEY for use C-TEC's CFP, XFP and ZFP fire panels. Provides authorised users with access to a fire panel's authorised user controls. Finished in red polycarbonate for extra strength. See tech. specs below for full panel compatibility details. A spare plastic S-KEY for use C-TEC's CFP, XFP and ZFP fire panels. Provides authorised users...