> Conventional Fire Systems>ActiV Sounders & VADs>ActiV 96dB(A) Conventional Base Sounder
ActiV 96dB(A) Conventional Base Sounder View larger

ActiV 96dB(A) Conventional Base Sounder

BF431C/CC/W

New

  • Third-party certified to EN54-3 (Sounders).
  • Impressive 96dB(A) sound output @ 1m.
  • Includes 31 selectable primary tones and an optional secondary tone.
  • Two volume levels (high and low)
  • Alarm Current at 30Vdc = 5.5mA
  • Alarm Current at 18Vdc = 3.8mA
  • Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
  • Supplied with a BF431QCP quick connect plate and detector spur wires.
  • IP21C rated.

LPCB VDS CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Approvals/certifications Certified to EN54-3 by the LPCB & VdS.
Protocol/compatibility Compatible with C-TEC's CFP, FP, MFP and EP203 conventional fire alarm panels and virtually all other makes (testing on third-party panels is recommended before use)
Application/operation Designed to be ceiling mounted - either stand-alone with a red or white cap or as part of a stacked Sounder/Detector Base combination.
Supply/operating voltage 18 to 30V DC.
Nominal SPL (Sound Pressure Level) 96dB(A).
Alarm current At 30Vdc: 5.5mA; At 18Vdc: 3.8mA.
Product dimensions (mm) 122mm diameter x 46mm deep (not including optional detector and base).
IP Rating IP21C (Type A).
Weight 170g.
Operating conditions/temperature -10ºC to +55ºC. Max. 95% RH (Non-condensing).
Notes For compliance to EN54-3, the BF431QCP Quick Connect Plate must be used with the base device.

Documentation

BF431QCP Quick Connect Plate

DFU4310020 Rev 2

Download (364.29k)

ActiV Base VAD Sndr Insts

DFU4311000 Rev 11

Download (473.92k)

ActiV Sounder VAD flyer

DML0547900 Rev 1

Download (2.25M)

Conv Base Range Polar Diag

DFU4311010 Rev 1

Download (267.81k)

9 other products in the same category:

Tone List

Here is a list of the 31 primary tone options available on this product (note that Tone 0 = sounder OFF).

Primary Tone List

1. C-TEC Evacuation Tone (UK)

Tone: 610Hz for 0.5s, 810Hz for 0.5s


2. Alert (ALL)

Tone: 825Hz, 1s on, 1s off


3. C-TEC Fast Warble (UK)

Tone: 810Hz for 0.25s, 610Hz for 0.25s


4. Medium Sweep (UK)

Tone: 800 - 970Hz at 1Hz


5. Dutch Slow Whoop (sweep) (NL)

Tone: 500-1200Hz for 3.5s, 0.5s off


6. DIN Tone (DE)

Tone: 1200Hz – 500Hz for 1s


7. Swedish Alternating Tone (SWE)

Tone: 660Hz, 150ms on, 150ms off


8. Swedish all clear (SWE)

Tone: 660Hz constant on


9. Swedish Local Warning (SWE)

Tone: 660Hz, 1.8s on, 1.8s off


10. Swedish Pre-mess (SWE)

Tone: 660Hz, 6.5s on, 13s off, 20s period


11. Swedish Turn Out (SWE)

Tone: 554Hz for 1s, 440Hz for 1s


12. Swedish tone (SWE)

Tone: 660Hz 0.5s on, 0.5s off


13. Evacuation Tone (Apollo Comparable) (UK)

Tone: 550Hz for 0.5s, 825Hz for 0.5s


14. Alternating (Hochiki/Fulleon Comparable) (UK)

Tone: 925Hz for 0.25s, 626Hz for 0.25s


15. French Fire Tone (FR)

Tone: 554Hz for 100ms/440Hz for 380ms to 420ms


16. Australian Alert Tone AS1670 (ISO7731) (AUS)

Tone: 420Hz 0.625s on/off


17. Australian Evacuation Tone AS1670 (AUS)

Tone: 500 – 1200Hz, 0.5s/0.5s off x 3/1.5s off


18. Aus (fast rise sweep) (AUS)

Tone: 3x(500-1200Hz for 0.5s), 0.25s off


19. NZ (slow rise sweep) (NZ)

Tone: 500-1200Hz for 3.75s, 0.25s off


20. US Temporal LF (ISO 8201) (USA)

Tone: 3x(970Hz, 0.5s on, 0.5 off), 1s off


21. US Temporal HF (ISO 8201) (USA)

Tone: 3x(2850Hz, 0.5s on, 0.5 off), 1s off


22. Simulated Bell (USA/General)

Tone: n/a


23. Singapore Alert Tone (SG)

Tone: 1kHz, 2kHz 0.5s alternating


24. PFEER Alert Tone (ALL)

Tone: 950Hz, 0.25s on, 0.25Hz off


25. PFEER Alert Tone (ALL)

Tone: 970Hz, 1s on, 1s off


26. ISO 8201 (ALL)

Tone: 970Hz, 0.5s on/0.5s off x 3/1.5s off


27. ISO 8201 (ALL)

Tone: 2850Hz, 0.5s on/0.5s off x 3/1.5s off


28. Misc Tone 1 (ALL)

Tone: 925Hz continuous


29. Misc Tone 2 (ALL)

Tone: 975Hz continuous


30. Misc Tone 3 (ALL)

Tone: 2850Hz continuous


31. Fast Sweep (ALL)

Tone: 2.5-2.85kHz at 9Hz


In addition to the above primary tone options, one optional secondary tone is available, see below. Please refer to the device’s wiring instructions for details on how to select this.

Optional Secondary Tone

Tone: 2.5-2.85kHz at 9Hz


Approval Certificates

Approval Certificate (LPCB)

Download

Approval Certificate (VdS)

Download

EC Certificate of Conformity (CPR)

Download

Declaration of Performance (C-TEC)

Download

Declaration of Conformity (C-TEC)

Download

BIM/CAD Drawings

BF431C/CC/W BIM (RFA)

DOWNLOAD

BF431C/CC/W with lid BIM (RFA)

DOWNLOAD