Apollo Discovery 58000-700 Multisensor Detector View larger

Apollo Discovery 58000-700 Multisensor Detector

BF314DH

New

  • A high specification multisensor detector.
  • Fully compatible with C-TEC's XFP & ZFP XP95/Discovery Addressable Fire Panels.
  • User programmable to operate in one of five sensivity modes (e.g. Mode 1 will give a higher senstivity to fire than Mode 5).
  • Comprises optical smoke and thermistor temperature sensors which give both a combined signal as well as a separate heat signal for improved false alarm management.
  • Ideal for a wide range of applications.
  • Recommended, in specific modes, for hotel bedrooms and hospital wards.
  • Remote test feature.
  • Red LED illuminates when the detector is in alarm.
  • Certified to EN54-5 and EN54-7 by the LPCB.
  • Requires a BF308XP standard base or BF308XPR low power relay base.
  • 'Xpert' card addressed for speedy installation.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Approvals/certificationsCertified to EN54-5 and EN54-7 by the LPCB.
CompatibilityCompatible with C-TEC's XFP/ZFP XP95/Discovery Addressable Fire Panels.
Application/operationComprises optical smoke and thermistor temperature sensors which give both a combined signal as well as a separate heat signal for enhanced false alarm management. Well suited for sensitive environments.
Application temperaturen/a
Static response temperaturen/a
SensitivityOption to select 5 different operating modes at the fire panel. See Operation Modes tab below for details.
Supply wiring2-wire, polarity insensitive.
Supply/operating voltage17 to 28V DC.
Quiescent current470µA.
Alarm current3.4mA (LED illuminated).
Indicators2 clear LEDs emitting red light when in alarm. Optional remote LED.
ConnectionsL1&L2 supply in/out; +R remote LED +Ve connection; -R remote LED -Ve connection. (5mA max. remote LED current @ 5V measured across remote load).
Product dimensions (mm)100mm diameter x 50 mm H (not in base). 58mm height when in base.
Construction & finishWhite polycarbonate UL94-VO. Nickel plated stainless steel terminals.
IP RatingIP44.
Weight105g (not in base); 160g (in base).
Operating conditions/temperature-40ºC to +80ºC.
NotesRequires a BF308XP standard base or BF308XPR low power relay base. 1mA power up surge current for 0.3 seconds.

Accessories

8 other products in the same category:

Operating Modes

The modes of operation for this detector, selectable from the XFP or ZFP control panel, are:-

Compensation rate complies with EN54-5 and EN54-7.