Remote Status Unit, Flush

EP210F

New

  • Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
  • Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
  • Three monitored input connections (Hold, Abort and Mode).
  • Max. 8 remote status units per EP203 panel.
  • Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Power requirements21-28VDC (200mA electronic fuse).
Quiescent current7mA.
Auxiliary inputsThree: (1) Hold; (2) Abort; (3) Mode. A 6k8 EOL resistor must be fitted across the terminals of the last device on each monitored input circuit. Unused circuits must have the 6k8 resistor fitted at the terminals.
IndicatorsGen. fire; Fire Zones (x3); Gen. disablement; Hold; 1st Stage Output; 2nd Stage Output; Release Imminent (x2); Exting. Released; Abort; Gen. Fault; Man. Only; Man/Auto.
ControlsExtinguishant release (housed in yellow casing); Operation keyswitch (Manual only or Manual & Auto).
Product dimensions (mm)175 W x 250 H x 70 D mm. Hole required for flush mounting 156 W x 232 H x 51 D mm.
Construction & finishMetal.
IP RatingIP30.
Weight1.338kg..
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.
Network specificationRS485; Max. 8 remote status units (any mix) per EP203; Four wire connection (2 power, 2 data); Daisy-chain wiring.

Documentation

EP203 Ancillary Devices DoC

Declaration of Conformity (EMC/LVD) DOC0000042 Rev 1

Download (159.04k)

Accessories

3 other products in the same category:

Dimensions & Mounting Information

Product dimensions:175 W x 250 H x 53 D mm. Hole required for flush mounting 156 W x 232 H x 51 D mm.

BIM/CAD Drawings

EP210F Flush mounted (RFA)

Download

EP210F surface mounted BIM (RFA)

Download