BF446A/CX/DR Hi-Output Wall Voice Sounder (deep base) View larger

Hi-Output Wall Voice Sounder (deep base)

BF446A/CX/DR

New

  • Superb sound intelligibility.
  • Includes three selectable voice message pairs.
  • Includes the same electronics as our EN54-3 & 17 certified wall sounder.
  • Onboard short-circuit loop isolator.
  • 550µA quiescent current.
  • 10mA alarm current @24V DC (voice sounder on max).
  • Group addressing facility allows multiple devices to be operated simultaneously.
  • 7 selectable volume levels and up to 15 selectable tone pairs.
  • IP33C (Type B) rated.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Protocol/compatibilityCompatible with C-TEC's XFP/ZFP XP95/Discovery Addressable Fire Panels.
Application/operationDesigned to be wall mounted. Indoor areas only.
VAD category & coveragen/a
Flash rate & colourn/a
Supply/operating voltage17 to 28V DC
Quiescent current550µA @ 24 VDC.
Nominal SPL (Sound Pressure Level)TBC. See tab below for Voice Message section options and audio preview files.
Alarm current10mA (Voice Sounder on max).
IndicatorsPolling (green LED) & Short Circuit Isolator Active (amber LED).
Product dimensions (mm)114mm diameter x 131mm deep.
IP RatingIP33C (Type B).
Weight300g.
Operating conditions/temperature-10ºC to +55ºC. Max. 95% RH (Non-condensing).
NotesIncludes the same electronics as our EN54-3 & 17 certified Hi-Output Sounder.

Documentation

Hi-Output Voice Sdr/VADs DoC

Declaration of Conformity (EMC/LVD) DOC0000061 Rev 1

Download (162.88k)

20 other products in the same category:

Voice Message Options

Messages - Pair One

Tone/Voice Message 1 (Primary)

Tone: Evacuate (550 Hz for 0.5 sec, 825 Hz for 0.5 sec);
Message: Attention please. Attention please. Fire has been reported in the building. Please leave immediately by the nearest exit. (repeated 2x)


Tone/Voice Message 2 (Secondary)

Tone: Alert (1 sec off, 825 Hz for 1 sec);
Message: This is a fire alert.This is a fire alert. Await further instructions. Await further instructions. (repeated 2x).


Messages - Pair Two

Tone/Voice Message 1 (Primary)

Tone: Evacuate (550 Hz for 0.5 sec, 825 Hz for 0.5;
Message: In the interests of safety please evacuate the building now. (repeated 3x).


Tone/Voice Message 2 (Secondary)

Tone: Alert (1 sec off, 825 Hz for 1 sec);
Message: All Clear. The emergency has been resolved. It is safe to resume normal activities. All Clear. (repeated 2x).


Messages - Pair Three

Tone/Voice Message 1 (Primary)

Tone: Evacuate (550 Hz for 0.5 sec, 825 Hz for 0.5 sec); 
Message: This is a test of the fire alarm system. Please do not take any action. (repeated 2x).


Tone/Voice Message 2 (Secondary)

Tone: Alert (1 sec off, 825 Hz for 1 sec);
Message: The fire alarm test is now complete. (repeated 3x).