QT636 Quantec Interface Unit c/w Remote Socket View larger

Quantec Interface Unit c/w Remote Socket

QT636

New

  • Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec.
  • Particularly suited for use with our NC805MD Portable Movement Detector (n/o operation), QT644 Floor Pressure mat (n/o operation), QT633 Bed Exit mat (n/c operation) or QT634 Chair Exit Mat (n/c operation).
  • Must be wired as a slave to a QT602 or QT609 range addressable call point or QT630 dementia care controller.
  • When the device connected to the QT636 is operated a call will be generated on the Quantec call system as programmed.
  • Mounts on a standard UK 25mm single gang back box.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Quiescent current1mA.
Alarm current1mA.
ConnectionsN-; N+; L+; SW. Wired as a slave to a QT602 call point, QT609 call point or QT630 dementia care controller.
Onboard 6.35mm Remote Jack SocketYes, can be configured to accept a n/o or n/c jack plug.
Onboard SounderNo.
Onboard Infrared ReceiverNo.
Product dimensions (mm)87 W x 87 H x 33 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.
Construction & finishPlastic.
IP RatingIP20.
Weight68g
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.

Documentation

Quantec Dementia Devices DoC

Declaration of Conformity (EMC/LVD) DOC0000041 Rev 1

Download (157.95k)

Accessories

12 other products in the same category:

Dimensions & Mounting Information

Product dimensions:87 W x 87 H x 35 D mm. Can be mounted on a standard UK 25mm single gang flush or surface back box.

BIM/CAD Drawings

QT636 Flush mounted BIM (RFA)

Download

QT636 Surface mounted BIM (RFA)

Download