ECU721 SigTEL Network Communication Card View larger

SigTEL Network Communication Card

ECU721

New

  • An optional system expansion device allowing the interconnection of up to 4 SigTEL Compact master controllers over a 1KM network.
  • One card required per networked master controller.
  • Allows systems of up to 64 lines (four ECU-8 masters each with an ECU-8S slave) to be easily set-up.
  • Any ECU-4 or ECU-8 can take control of the system at any time by the input of a special code.
  • Note that for networked systems that do not require multiple control points, Master Controllers without handsets are available (ECU-8NT).

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

ConnectionsCat 5 patch lead (supplied) connects the ECU721 to a master controller.
Product dimensions (mm)92 W x 108 H x 20 D mm.
Weight56g.
Network specificationThe ECU721 card transmits speech via a single wiring loop and digital data via two linear RS485 networks. The network should be connected using 4 x 2-core 1.5 mm2 enhanced fire-rated cable. Max. length of all networks is 1 km.
NotesWe recommend two separate cable paths be run with each path containing a single speech and single data cable (which should not be mixed in the same cable). Download main ECU-4/8 Instructions below for further details.

Documentation

6 other products in the same category: