SigTEL 8 Line Expansion Unit

ECU-8S

New

  • Can be connected to an ECU-4 or ECU-8 SigTEL master controller to increase its line capacity to 12 or 16 lines respectively.
  • Does not require a separate mains supply or batteries.
  • Can be semi-flush mounted using an AFP385 bezel.
  • Easily interfaced to NC951 accessible toilet alarms, PDA audio-frequency induction loop systems, strobes, CCTV activation relays, etc.

CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Approvals/certificationsFacilitates compliance with BS5839-9 when correctly installed.
No. of lines8 (must be used in conjunction with an ECU-4, ECU-8 or ECU-8NT master controller).
Expansion connectionsConnects to a ECU-4, ECU-8 or ECU-8NT master controller's 2 x CAT5 connectors provided (leads supplied).
Product dimensions (mm)410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).
Construction & finishMetal lid and base, RAL7035 grey texture.
IP RatingIP20.
Weight3.1kg (without batteries).
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.

Documentation

EVCS Control Panels DoC

Declaration of Conformity (EMC/LVD) DOC0000019 Rev 1

Download (157.92k)

6 other products in the same category:

Dimensions & Mounting Information

Product dimensions: 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). .
Hole required for semi-flush mounting:412 W x 255 H x 50 D mm. Requires AFP385 bezel.

BIM/CAD Drawings

ECU-8s Flush mounted BIM (RFA)

Download

ECU-8s Surface mounted BIM (RFA)

Download