12V 2A Caged Switch Mode PSU View larger

12V 2A Caged Switch Mode PSU to EN54-4/A2

BF360-12/E

New

  • Supplied in a finger-protective cage to VDE 0100-410.
  • Includes the same electronics as our BF360-12 VDS certified EN54-4/A2 boxed 12V 2A PSU.
  • Ideal for mounting inside an OEM enclosure.
  • Can be connected to a 12V security system STU or auto-dialler to provide BS5839-1 compliant remote monitoring facilities.
  • Deep discharge battery protection and EN54 compliant reporting of battery impedance faults.
  • Includes a single-pole volt-free changeover relay that switches for any fault condition.
  • Three LED indicators - supply present, general fault and auxiliary fault (for optional connection to third-party equipment).
  • Link selectable battery charging capacity.
  • Environmentally-friendly charging circuit - dissipates just 0.35W compared to the industry norm of 2.55W.
  • Optional 'PCB-only' version available (order code BF360-12/C).

 CE

By buying this product you can collect up to 21 loyalty points. Your cart will total 21 points that can be converted into a voucher of $4.20.


By buying this product you can collect up to 21 loyalty points. Your cart will total 21 points that can be converted into a voucher of $4.20.


Technical Specifications

Approvals/certificationsIncludes the same electronics as our EN54-4/A2 VdS certified BF360-12/E PSU.
Application/operationA caged Mains to regulated DC power supply providing 2A @ 12V DC for mounting in OEM enclosures. Full compliance with all relevant standards must be checked by the responsible person with the caged PSU installed in a suitable enclosure.
Mains supply230V 50/60Hz.
Mains rated current350mA maximum. (80.5 VA)
Total output current limited to2A (Max. continuous output current).
OutputOption A: 1.8A DC current; 0.2A charge current. Option B: 1.3A DC current; 0.7A charge current.
Battery charge capacity2 Ah to 12 Ah.
IndicatorsSupply Present (Green); General Fault (Amber); Auxiliary Fault (Amber); Hazardous Voltages Present (Red).
ConnectionsMains Input (CONN1); Supply Output (CONN3); Battery Input (CONN3); Fault Relay (CONN4); Charge Off Input (CONN5). Battery Charge Current Link (PLK1); Battery Monitoring On/Off Link (PLK2); High Temp. Output (PL2).
Product dimensions (mm)117 W x 174 H x D 54mm.
Construction & finishZintec cage.
IP RatingDependent on mounting enclosure.
Weight440g.
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.
NotesThe BF360-12/E must be installed in a suitable enclosure (not supplied) which must withstand the operating conditions of the PSU. Adequate ventilation must be provided and component temperature limits must not be exceeded. See main instructions.

Documentation

EN54-4 PSU DoC

Declaration of Conformity (EMC/LVD) DOC0000001 Rev 1

Download (161.65k)

12 other products in the same category: