NC941/SS Stainless Steel Single Zone Call Controller View larger

Stainless Steel Single Zone Call Controller c/w 12V PSU

NC941/SS

New

  • A high-quality brushed stainless steel single zone call controller c/w a 12V 250mA PSU.
  • Fully compatible with C-TEC's entire range of 800 Series Call System components.
  • Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
  • Power On and Alarm ‘CALLING’ LEDs.
  • Open collector output goes to 12V when the controller's onboard buzzer sounds.
  • Mounts on a standard UK 40mm double gang flush or surface back box.
  • Optional NC941B 0.3A battery battery backup kit also available.

  CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Mains supply230V 50/60Hz (36mA max. current). 50Hz frequency.
Internal power supply13-13.8V d.c.
Total output current limited to250mA.
Quiescent current0mA (none).
Max battery size and typeOptional NC941B 12V 0.3Ahr battery back up kit available.
Alarm currentDetermined by the number/type of field devices connected to the call controller/system.
Auxiliary relaysNone.
Open collector outputs1 x Output terminal (goes +12V steady when the controller's buzzer sounds). 20mA max.
IndicatorsRed Alarm LED; Green Supply Present LED.
ControlsRESET button (can be disabled if required).
Connections-Ve (common -Ve terminal for all devices); +Ve (+12V nominal supply for powering emergency call points, overdoor lights, etc.); Signal (the trigger line which activates the NC941/SS).
Expansion connectionsBatt + and Batt - (for connection to an optional remote NC941B battery back up kit).
Call acknowledgement functionalityNo. If this feature is required consider using our NC943B plastic call controller instead.
Product dimensions (mm)156 W x 94 H x 37 D. Mounts on a standard 40mm UK double gang back box - see notes below.
Construction & finishBrushed stainless steel.
IP RatingIP41.
Weight460kg.
Operating conditions/temperature-5ºC to +40ºC. Max. relative humidity 95% non-condensing.
NotesFor flush mounting, we suggest a 47mm double gang steel back box such as Appleby's SB628 or MK's 878 ZIC. For surface , we suggest the MK K2212 ALM or 2212 ALM Aluminium coloured. If a plastic dry lining box is required, use the Marshall-Tufflex MDLB30

Documentation

NC800 Call Controllers DoC

Declaration of Conformity (EMC/LVD) DOC0000009 Rev 1

Download (163.57k)

14 other products in the same category:

Dimensions & Mounting Information

NC941/SS S/Steel Call Controller:147 W x 94 H x 37 D mm. Mounts on a 40mm UK double gang back box.