NC842/852/862KE Emergency Indicator Panel View larger

40-60 Zone Emergency Indicator Panel

NC842KE, NC852KE, NC862KE

New

  • A range of 40 to 60 Zone Emergency Indicator Panels c/w 12V 400mA PSUs.
  • Fully compatible with C-TEC's entire range of 800 Series Call System components.
  • Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
  • 40, 50 or 60 zonal alarm LEDs (dependent on model purchased, see below for parts listing).
  • Optional mute button.
  • 2 volt-free relay contacts.
  • Surface mounting.
  • Connections for optional Repeater panels and sounders to increase call indication levels.

  CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Mains supply230V 50/60Hz. (Max. current TBC).
Internal power supply13.5V d.c. (400mA max. current when powered by Mains).
Quiescent current0mA (none).
Max battery size and type12V 2.1Ah VRLA.
Alarm currentDetermined by the number/type of field devices connected to the indicator panel/system.
Auxiliary relays2 volt free relay contacts (NO/C/NC). Relay 1 activates on a standard call and pulses on an emergency call; Relay 2 activates on a emergency call. Both relays rated at 500mA @ 12V d.c.
Indicators40 (NC842KE), 50 (NC852KE) or 60 (NC862KE) red Zonal Alarm LEDs. Lit steady for a Standard call, pulse for an Emergency call); Internal buzzer (on steady for any Standard call, intermittent for any Emergency call).
ControlsOptional mute button.
Expansion connectionsConnections provided for up to 10 repeater panels and 3 remote sounders.
Call acknowledgement functionalityNo.
Product dimensions (mm)397 W x 168 H x 87 D mm. Surface mounting.
Construction & finishMetal.
IP RatingIP41.
Weight5.892kg.
Operating conditions/temperature-5ºC to +40ºC. Max. relative humidity 95% non-condensing.

Documentation

NC800 Emergency Panels DoC

Declaration of Conformity (EMC/LVD) DOC0000024 Rev 1

Download (160.55k)

14 other products in the same category:

Dimensions & Mounting Information

Product dimensions406 W x 428 H x 98 D mm. Surface mounting.

Part Numbers (Masters & Repeaters)

NC842KE40 Emergency Indicator Panel c/w 12V 400mA PSU and optional mute button.
NC852KE50 Emergency Indicator Panel c/w 12V 400mA PSU and optional mute button.
NC862KE60 Emergency Indicator Panel c/w 12V 400mA PSU and optional mute button.
NC841KE40 Emergency Repeater Panel
NC851KE50 Emergency Repeater Panel
NC861KE60 Emergency Repeater Panel

Operation

OVERVIEW

NC842KE, NC852KE and NC862KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.

Depending on the devices wired to it, Standard and Emergency calls can be indicated via its buzzer and zonal LEDs. An optional Mute button is also provided to allow the user to silence standard calls.

OPERATION

STANDARD CALLS: when triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steady.

Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel's internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.

EMERGENCY CALLS: when triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the Panel. An emergency call can only be reset at the device from which it was triggered or via a reset point, wired on the same zone.

BIM/CAD Drawings

BIM Drawing (REVIT)

This file will be uploaded to our website shortly.
Should you need an urgent copy please contact our
marketing team at marketing@c-tec.co.uk

Back to links
Back to links

CAD Drawing (DWG)

This file will be uploaded to our website shortly.
Should you need an urgent copy please contact our
marketing team at marketing@c-tec.co.uk

Back to links
Back to links