Green Disabled Refuge Outstation, flush

EVC302GF

New

  • An attractive Type B disabled refuge outstation.
  • Stylishly finished in tough, durable green steel.
  • Suitable for use with C-TEC's SigTEL disabled refuge / emergency voice communication system.
  • Allows anyone located in a disabled refuge area to communicate with a SigTEL Master Controller at the touch of a button (and vice versa).
  • Offers true duplex speech.
  • Features a ‘Push to Call or Answer’ button, a 'Call in Progress' LED, buzzer, microphone and loudspeaker.
  • Includes connections for an optional induction loop system and a general-purpose open collector output that closes on activation of the unit. 
  • Meets and exceeds the requirements of BS 5839-9 when correctly installed.

CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Approvals/certificationsFacilitates compliance with BS5839-9 when correctly installed.
Supply/operating voltage11V DC derived from a compatible SigTEL Master Controller (drops to 6 V DC when in use).
Quiescent current3mA
Activation current25mA (current draw when intercom is in use).
Open collector outputsO/P +Ve & O/P –Ve (closes when outstation is active, typically used to trigger a third party CCTV camera, opto-isolated, normally open, max. 24 V DC, 3 mA).
IndicatorsRed call in progress LED
ControlsExternal 'Push to Call or Answer' button (Off Hook); Internal Loudspeaker volume control; Engineer’s “On Hook” and “Off Hook” pins.
Expansion connectionsAFILS +Ve & AFILS –Ve (typically connected to the line-level input of an optional induction loop amplifier): Off-Hook and -Ve (can be optionally connected to an NC951 accessible toilet alarm kit (see instructions for details).
Product dimensions (mm)175 W x 250 H x 53 D mm. Hole required for flush mounting: 156 W x 232 H x 51mm D approx (no brezel required).
Construction & finishGreen steel.
IP RatingIP20.
Weight1.5 kg.
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.
NotesMicrophone frequency response 250 Hz to 5 kHz ±3 dB; Loudspeaker frequency response 250 Hz to 4 kHz ±3 dB; Audio output level: 0 dB (775 mV) balanced line.

Documentation

EVCS Type B Outstations DoC

Declaration of Conformity (EMC/LVD) DOC0000020 Rev 1

Download (158.87k)

Accessories

4 other products in the same category:

Dimensions & Mounting Information

Product dimensions:160 W x 240 H x 53 D mm. Designed for flush mounting only.
Hole required for flush mounting:156 W x 232 H x 51mm D approx (no bezel required)

BIM/CAD Drawings

EVC302GF Flush mounted BIM (RFA)

Download

EVC302GF Surface mounted BIM (RFA)

Download