Slave Calling Devices

Slave Calling Devices

A wide selection of slave devices allowing users to generate calls via a call point's remote socket or other compatible interfacing device. Choose from portable movement detectors, pressure pads and air switches, tail call leads, pressure mats and more.

Slave Calling Devices  There are 13 products.

per page
Showing 1 - 12 of 13 items
  • A short 1.8m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug. Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.... A short 1.8m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows...

  • A long 4.2m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped call push, 4.2m (14ft) trailing lead and a 6.35mm remote jack plug. Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.... A long 4.2m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows...

  • An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped call push, coiled 1.2-3.6m trailing lead and a 6.5mm remote jack plug. Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call... An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems....

  • Ideal for people who find it difficult to press the buttons on standard tail call leads. Must be used in conjunction with a separately-available NC805AS Air Switch. Applying pressure to the pneumatic pad operates the highly-sensitive NC805AS air switch which in turn, when connected to a compatible call point’s remote socket via its 6.35mm remote jack,... Ideal for people who find it difficult to press the buttons on standard tail call leads. Must be...

  • Designed for use with C-TEC's NC805P Pneumatic Pad. Applying pressure to the NC805P operates the air switch which in turn triggers a Standard call when the 6.35mm jack plug on the NC805AS is connected to a compatible call point’s remote socket. Operates at a minimum differential air pressure of 0.9 p.s.i (pounds per square inch) or 6220 Pa (pascals) ±... Designed for use with C-TEC's NC805P Pneumatic Pad. Applying pressure to the NC805P operates the...

  • A simple to operate weight sensor designed to sit under the leg of a bed. Triggers a Standard call when the bed is vacated to alert staff to the prospect of a wandering patient.   Portable, robust and easy to adjust. Ideal for use in residential care facilities where it can be used for new patients finding it difficult to adjust or for patients... A simple to operate weight sensor designed to sit under the leg of a bed. Triggers a Standard...

  • A durable 90cm x 60cm (3ft x 2ft) floor pressure mat c/w 2m lead and 6.35mm jack plug. Designed to trigger a Standard call on a Quantec or 800 Series Call System when foot pressure is detected. Typically located alongside a bed to alert staff to the prospect of a wandering patient in nursing homes, etc. Can also be used in low-level access control... A durable 90cm x 60cm (3ft x 2ft) floor pressure mat c/w 2m lead and 6.35mm jack plug. Designed...

  • Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec. Particularly suited for use with our NC805MD Portable Movement Detector (n/o operation), QT644 Floor Pressure mat (n/o operation), QT633 Bed Exit mat (n/c operation) or QT634 Chair Exit Mat (n/c operation). Must be wired as a slave to a... Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be...

  • Designed to trigger a call by sensing the pressure change when a patient exits a bed. Connects to Quantec via the remote jack socket on a QT637 Enuresis/General Purpose Interface Socket or QT636 Interface Unit. To reduce the risk of nuisance calls, the QT637 includes circuitry that prevents a momentary change in pressure such as a patient quickly... Designed to trigger a call by sensing the pressure change when a patient exits a bed. Connects...

  • Designed to trigger a call by sensing the pressure change when a patient exits a chair. Connects to Quantec via the remote jack socket on a QT637 Enuresis/General Purpose Interface Socket or QT636 Interface Unit. To reduce the risk of nuisance calls, the QT637 includes circuitry that prevents a momentary change in pressure such as a patient quickly... Designed to trigger a call by sensing the pressure change when a patient exits a chair. Connects...

  • Allows bed wet sensors, floor pressure mats and bed/chair exit sensors to be easily interfaced to a Quantec addressable call system. Includes two 6.35mm remote jack sockets - one for use with a QT635 enuresis/bed wet sensor and one that will accept a floor pressure mat (QT644), bed exit mat (QT633) or chair exit mat (QT634). Onboard battery/isolation... Allows bed wet sensors, floor pressure mats and bed/chair exit sensors to be easily interfaced to...

  • Designed to trigger a call when moisture is detected in a patient's bed. Connects to Quantec via the jack socket on the QT637 Enuresis/general purpose interface socket. Typically positioned across and over a mattress, directly underneath the bed sheet. Protects against patient discomfort and reduces the number of incontinence checks staff are required... Designed to trigger a call when moisture is detected in a patient's bed. Connects to Quantec via...

Showing 1 - 12 of 13 items