QT422RX Quantec Radio Receiver View larger

Quantec Radio Receiver

QT422RX

New

  • Designed for use with Quantec’s QT412 & QT432 range of infrared/radio transmitters and pendants.
  • Operates at radio frequency (RF) 868.3 MHz,
  • Allows standard, help required, emergency and/or attack calls to be generated from external areas such as car parks, loading bays, etc.
  • Typical RF coverage is 60m (depending on physical conditions & environmental factors).
  • Optional external extension aerial (QT422RXEX) can increase coverage to up to 90m.
  • Test Mode allows localised transmitter/receiver testing.
  • Optional QT421 RF Integrity Transmitter can be used to send regular test transmissions to the Receiver to ensure it is operational (a fault is flagged if a transmission is not received).
  • Can be configured to receive calls from certain transmitters only via an RF grouping facility.

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

Quiescent currentTBC.
IndicatorsPower (green); RF Data (green); Error (amber).
Controls1 x ‘Group ID’ dipswitch; 1 x ‘Operating Modes’ dipswitch - see instructions for details.
ConnectionsNet +: Net -.
Onboard 6.35mm Remote Jack SocketNo.
Onboard SounderNo.
Onboard Infrared ReceiverNo.
Product dimensions (mm)275 W x 220 H x 92 D mm. Surface mounting.
Construction & finishPlastic.
IP RatingTBC.
Weight1.44kg
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.

Documentation

Quantec Radio Receivers DoC

Declaration of Conformity (EMC/LVD) DOC0000007 Rev 1

Download (161.35k)

9 other products in the same category:

Dimensions & Mounting Information

Product dimensions:271 W x 200 H x 73 D mm. The receiver must be surface mounted internally, ideally on a flat horizontal surface in the building’s roofspace overlooking the area requiring RF coverage. Avoid locating too close to large metallic objects (such as a metal clad roof) and thick structutal walls. If this is unavoidable, consider using the QT422RXEX external extension aerial instead of the mini-aerial supplied.

BIM/CAD Drawings

QT422RX Radio receiver BIM (RFA)

Download