200m2 Lecture Room Hearing Loop Kit

AKL1

New

  • Includes a PDA200E hearing loop amplifier, AMT tie/desk microphone, AML lectern microphone, 2 x APJ 3.5mm jack input plates, 2 x 6m Belden cable.
  • Ideal for creating a high quality induction loop system for a Lecture room.
  • Wall-mountable PDA200E amplifier capable of driving a perimeter loop of up to 200m2.
  • Internal drive, level and metal compensation controls.
  • Two balanced / unbalanced line level inputs.
  • One microphone input with 12V phantom power for electret microphones.
  • Full compatibility with the Outreach plate audio input extension system.
  • Fully compliant with BS EN 60118-4 when correctly installed.
  • Loop cable not included - use our LOOP2W 1mm2 cable or download our AFILS loop calculator from our Software & Apps page for more precise recommendations. 

CE  CE

By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


By buying this product you can collect up to 27 loyalty points. Your cart will total 27 points that can be converted into a voucher of $5.40.


Technical Specifications

TypeWall mounting. Requires fixed Mains wiring.
Coverage200m2 approx.
Mains supply230V 50/60Hz.
Auxiliary inputs1 Microphone and 2 x Line/Outreach screw connectors (on PDA200E).
IndicatorsInput level; loop current meter (peak 3, 2, 1); compression; power on.
ControlsInput level; loop drive, metal compensation.
Product dimensions (mm)W 271 x H 200 x D 77mm (amplifier only).
Construction & finishWhite painted steel (PDA200E); plastic accessories.
IP RatingIP20.
Weight2.9 kg (amplifier only).
Operating conditions/temperature-5ºC to +40ºC. Max relative humidity: 95%.
Kit contentsPDA200E 200m2 hearing loop amplifier; AMT tie/desk microphone, AML lectern microphone and 2 x APJ 3.5mm jack input plate; 2 x 6m Belden cable; Loop Fitted sticker. Loop cable IS NOT included.

Documentation

10 other products in the same category:

Dimensions & Mounting Information

PDA200E Product Dimensions:271 W x 200 H x 77 D mm. Designed to be surface mounted on a wall.
APJ Product Dimensions:85 W x 85 H x 15 D mm. Mount on standard UK 25mm flush or surface single gang back boxes.

BIM/CAD Drawings

BIM models of the PDA200E and APJ can be downloaded from our PDA200E and APJ product pages.